DFB光源堆 8DWDM通道 单模输出
ADFB series DFB source bank products are designed for testing Dense Wavelength Division Multiplexing (DWDM) devices and systems. Every DFB source bank can be custom ordered with up to 8 wavelengths to best fit your testing specifications and allowing for decreased testing cycles and improved efficiency. With its simple and intuitive front panel interface, the user can control each DFB channel individually for active output, output power level, and wavelength (up to +/- 800 pm tuning range with +/- 5 pm stability).
Features:
- Channel spacing of 100 GHz or 50 GHz
- Include LabVIEW driver for change/monitor each DFB
- Can be integrated into 80 channel system
- RS232 & USB port
|
Technical Specifications |
|
Model Number |
ADFB-8-S-R |
|
|
|
|
Number of Channels |
8 |
|
|
|
|
Wavelength Range |
1528.77-1563.45nm Standard, L-Band Optional (Additional Charge) |
|
|
|
|
Laser Linewidth |
2 MHz typical, 5 MHz maximum |
|
|
|
|
Wavelength Accuracy |
+/-5 pm |
|
|
|
|
Wavelength Tuning Range |
+/-800 pm |
|
|
|
|
Wavelength Stability |
+/-5pm over 24 hours |
|
|
|
|
Output Power |
10mW typical, 5mW minimum |
|
|
|
|
Output Power Stability |
0.02db over 8 hours |
|
|
|
|
Power Attenuation Range |
0-10dBm |
|
|
|
|
Optical Isolator |
30dB minimum |
|
|
|
|
Relative Intensity Noise |
-145dB/Hz |
|
|
|
|
Side Mode Suppression Ratio |
45dB minimum |
|
|
|
|
Polarization Extinction Ratio |
N/A |
|
|
|
|
Modulation |
N/A |
|
|
|
|
User Interface / Environment |
|
|
|
|
|
Operation Temperature Range |
+10˚C to +40˚C |
|
|
|
|
Storage Temperature Range |
-10˚C to +60˚C |
|
|
|
|
Power Supply |
80-240 VAC |
|
|
|
|
Dimensions |
3.5in(H) x 19in(L) x 12in(W) |
|
|
|
|
LCD Display |
Channel, Output Power, Laser Diode Current, TEC Temperature |
|
|
|
|
Controls |
Channel On/Off, Output Power, Wavelength |
|
|
|
|
Computer Interface |
LabVIEW via RS232 |
|
|
|
|
Optical Connectors |
FC/UPC, FC/APC, SC/UPC, SC/APC |
|
|
|
|
Optical Fiber |
SMF28 |
|
|
|
|
|
|
| |
