极宽光谱SLD 高功率模块(780-900nm高功率SLD模块)
我们的主要产品是波长从650nm到1620nm具有不同谱带的单模尾纤SLD模块。
我们正在为不同的应用制造制冷(有制冷器和电热调节器)和非制冷的模块，像光纤陀螺仪、OCT、光纤组件测试、光计量学和大量的其它模块。我们也提供自由空间模块，特别是用于原子力显微术，但也包括无斑纹照明、白光干涉测量、光学试验和测量以及其它模块。
Model number：SLD-35-HP
特征：
- 3 power categories: SLDs with an output power of up to
25 mW ex SM-fiber and a 3-dB spectrum width of 62 – 65 nm
- centered at 825, 845 and 865 nm
- very short coherence length
- negligible residual Fabry-Perot modulation depth; <1% (<0.05 dB) upon request
封装：
- fiber coupled – Butterfly, DIL
- free space – TOW
应用：
- ultra-high resolution OCT
- Bragg grating sensors
- fiber sensors
- optical measurements
- others
Special versions:
- modules with reduced sensitivity to optical feedback
|
Parameter |
Category |
Min |
Typ. |
Max |
|
Output power ex SM fiber, mW, SLD-351
|
HP1 |
5 |
7.5 |
- |
|
HP2 |
10 |
15 |
- |
|
HP3 |
20 |
25 |
- |
|
Free space output power, mW, in
a cone N.A=0.71，SLD-350*
|
HP1 |
10 |
15 |
- |
|
HP2 |
20 |
30 |
- |
|
HP3 |
40 |
50 |
- |
|
Forward current**, mA
|
HP1,2 |
- |
200 |
300 |
|
HP3 |
- |
300 |
350 |
|
Forward voltage, V |
All |
- |
- |
3.0 |
|
Central wavelength, nm |
All |
815 |
825
845
855 |
870 |
|
Spectrum width, FWHM, nm |
All |
57 |
62 |
- |
|
Residual spectral modulation depth, % |
All |
- |
2.0 |
5.0 |
|
Secondary coherence subpeaks
(Reflectivity), dB (10 log) |
All |
- |
-25 |
- |
|
Spectral flatness***, dB |
All |
|
|
3.0 |
|
Slow/fast polarization ratio (PM-fiber
coupled polarized modules), dB |
All |
|
7.0 |
|
|
Operating temperature****, °C |
All |
-55 |
- |
+80 |
|
Cooler current, A |
|
- |
- |
1.2 |
|
Cooler voltage, V |
|
- |
- |
3.5 |
* - TOW-packaged SLDs;
** - current is specially adjusted to get the highest output power with equal
intensity of spectral humps; different for different modules;
*** - describes spectral intensity dropout between spectral humps
**** - HP1-rated butterfly-packaged SLDs; more details upon request
The following part numbers should be used for ordering:
SLD-35(a)-(b)-(c)-(d)-(e)-XXX,
where:
(a) – 0 (free space) or 1 (fiber pigtailed),
(b) – power category, HP1, HP2 or HP3,
(c) – package type,
(d) – SM or PM (for fiber coupled modules),
(e) – PD (if PD monitor is required),
XXX – wavelength ( 825, 845, 865; a ±10-nm tolerance is guaranteed).
Example: SLD-351-HP1-DIL-SM-PD-825.
10-3 maximum feedback is allowed to run HP series SLDs safely at full
power. Models with reduced sensitivity to optical feedback are
available upon request. |
